Products
Your current location: Home > Products > Alarm Products
  • Introduction
  • Type
  • Features
  • Parameter
  • Case
Hengtong HT-23 ×× series of network alarm host include HT-N238: 8 zones; HT-N2316: 16 zones; HT-N238-R: 8 zones with remote arm and disarm; HT-N2316-R: 16 zones Four models with remote arm and disarm.
User Duanyou alarm host, space motion detectors, glass break detectors, door switch sensors, emergency button, smoke detectors, alarm and back-up batteries and other equipment. Alarm host by connecting the keyboard to the host for programming and operation, the keyboard simultaneously host failure alarm, alarm, arm, disarm, bypass, debypass other states.
Alarm host can connect to the public telephone network and / or via a telephone line connected to the network through a network interface and connected to the central station. Alarm center in time to receive a variety of information coming from the front of the control panel, and through the network of alarm host arm, disarm, bypass, debypass various control operations, remote programming.
 HT-2316-RM triple alarm host

Product Name Product Type Explanation
Network alarm host HT-N238 8 zone line EOL alarm input interface, telephone, Internet Dual Alarm
HT-N2316 16 EOL alarm zone line inputs, telephone, Internet Dual Alarm
HT-N238-R 8 zone line EOL alarm input interface, telephone, internet dual alarm, wireless arm and disarm
HT-N2316-R 16 EOL alarm zone line inputs, telephone, internet dual alarm, wireless arm and disarm
GSM wireless module HT-CKWU Send report via GSM wireless network, SMS, telephone or network alarm center receives information
● zone interfaces, normally open, normally closed, EOL end of line resistance, monitoring circuit programming choices
● telephone, Internet Dual incident reports, GSM wireless module optional
● The remote control cloth, disarm selection
● Support restore the factory parameters
● support dynamic registration (Hengtong registered, peanut shells registration optional)
● telephone dial-up alarm, supports Contact ID protocol, supports four telephone receiver
● Alarm Host Configuration 2 trigger outputs, external relays, and time can be set to trigger function
● alarm interfaces, pulse, steady alarm sound settings, Offbeat duration settings
● Backup battery interface, battery dynamic test, low voltage report, a mains failure, the recovery report
● 24-hour zones, fire zones burglary zones, interior zones
● Host tamper switch interfaces, tamper alarm
● host status report, send a self-test report time settings
● host arm, disarm, disarm the alarm control, arm and disarm the report; Zone Bypass, setting debypass
● host watchdog instructions
● alarm center via the network to quickly receive the host of action information, and to host arm, disarm, bypass, debypass, clear the alarm memory and other control operations, but also for remote programming via the virtual keyboard
● break alarm center network alarm, automatic connection settings
● Alarm Center multi-level map settings, you can add the direct control point on the map, monitor point the front control panel can directly control and programming, display monitor position directly when the alarm
● Alarm Center Information block the front control panel instantly displays the information from, you can query, print history
No. Project Technical parameters
1 Loop control 8/16 zone interfaces, normally open, normally closed, EOL end of line resistor circuit programming choices
2 Response time Zone response time can be between 5 ms, 250 ms, 500 ms, 750 ms selection
3 Remote control Remote Control remote arm, disarm, open to remote distance ≥30 meters, frequency 315MHz ± 1 MHz
4 User password Support a system master password and user password 31
5 Keyboard connector A keyboard interface, Parallel 8 keyboard, the address switch identification
6 System reset A reset jumper, short DEFAULT terminals, the power to restore the original value on the system
7 Setting limits One limitation jumper, short SET terminals, the system can set the IP address and other network parameters.
8 Network Interface A RJ45 10M / 100M adaptive Ethernet interface connected to the network
9 Telephone Interface An outside, a telephone interface, Contact ID protocol, alarm grab line, supports four telephone receiver
10 Siren Interface A siren interfaces, pulse, steady alarm sound settings, Offbeat duration settings
11 Spare battery A battery interface, battery dynamic test, low voltage report, a mains failure, the recovery report
12 Tamper alarm Optionally a 24-hour zone interface to connect tamper switch, tamper alarm
13 Trigger linkage 2 trigger outputs, external relays, and time can be set to trigger function
14 Cache Cache 150 event information
15 Power supply Machine power: AC220V, 50Hz, motherboard power: DC12V, power consumption: ≤5W
16 Size With housing Machine: 275 × 275 × 70mm, motherboard: 200 × 105 mm
17 Operating temperature 0℃ ～＋55℃
18 Humidity 5%～90%