Products
Your current location: Home > Products > Access Control System
  • Introduction
  • Type
  • Features
  • Parameter
  • Case
HT-REMD two parts by the front end of the emergency control system GPIO output control panel, telephone control module and power supply boards of emergency controller and remote emergency control software. The front end of the emergency controller via a telephone line connected to the public telephone network, connect a LAN via RJ45, accepting emergency command center and telephone signals to control 8 relay opening / closing operation.
HT-REMD emergency control system is often used in emergency lights, open the door and other controls. When the HT-REMD the connected device control system suddenly fails and can not be controlled, to an emergency center for help from the central issue control instructions to the controller via the network, when the network outage can not be controlled, can be extracted control code, authorization issue control instructions to the controller via the telephone network.
● Network Connection Center remote emergency control front-end equipment, off
● Run automatic hardware detection, buzzer
● telephone line connected to the public telephone network, authorized phone users emergency control equipment on and off
● Authorization dongle, random password extraction, by telephone emergency control equipment
● 8 control outputs, normally open normally closed jumper settings
● hardware upgrades, setup, password control
● Controller tamper switch interfaces, tamper alarm
● reset button to restart the system, press 5 seconds to restore the factory default parameters
● user management, operation logs, user logs off, quit
● User management to set the user name, password, and the operating authority
● operation log for future reference
● Search software search, modify, set up monitoring points in the network parameters
● Device Settings emergency monitoring point control information
● Devices list shows the state of emergency monitoring points
● The event list logs the event date, time, event source, channel, event type, event description and Alarming information
● event query, according to time and various types of information query, statistics, print, export
No. Project The main technical parameters
1 Network Interface Standard RJ45 adaptive 10 / 100M Network Interface
2 Network protocol TCP/IP、UDP、ARP、ICMP、IGMP protocol
3 Output Control 8 control outputs, normally open normally closed jumper settings
4 Tamper alarm The controller tamper interface tamper alarm
5 Reset button Reset button to restart the system, press 5 seconds to restore the factory default parameters
6 Telephone Interface A phone line interface parallel telephone network and telephone communications
7 Setting limits A hardware jumper limit set
8 Upgrade limitations A hardware jumper restrictions upgrades
9 Login authentication A hardware jumper to enable login authentication
10 AC detection An AC detection interface detects AC power supply is working properly
11 DC Detection A DC detection interface detects DC power supply is working properly
12 Controller Power AC220V，50Hz，rated current 2A
13 Controller size 350×270×75mm
14 Working temperature 0～50℃
15 Relative humidity 10～90%