Products
Your current location: Home > Products > Audio and Video Products
  • Introduction
  • Type
  • Features
  • Parameter
  • Case
      HT-IPC-definition network cameras use & nbsp; 1/3 inch HD Ultra low-light CMOS progressive scan sensor with resolutions up to 3M (2048 × 1536), can output Full HD 1080P real-time image, products for remote HD video acquisition and transmission.
HT-IPC definition network cameras for multiple models, listed below:
Model Explanation Model Explanation
HT-IPC-701 720P HD gun HT-IPC-701-G 720P HD gun GSM transmission
HT-IPC-702 1080P HD gun HT-IPC-702-G 1080P HD gun GSM transmission
HT-IPC-701-O 720P HD video input PIP gun HT-IPC-703 720P HD hemisphere
HT-IPC-702-O 1080P HD video input PIP gun HT-IPC-704 1080P HD hemisphere
HT-IPC-721 720P infrared gun HT-IPC-721-F 720P focusing infrared gun
HT-IPC-722 1080P infrared gun HT-IPC-722-F 1080P focusing infrared gun
HT-IPC-723 720P Infrared Dome HT-IPC-724 1080P IR Dome
HT-IPC-731 720P HD mini    
HT-IPC701 / 702 HD gun-type network camera

   HT-IPC network camera without a lens factory installation please select CS lens. Please go to the next installation cover to protect the lens mounting holes, then screw the lens, plug in the data line interface. Make sure to tighten the screws when installing the mounting bracket, so as not to stand off.

HT-IPC701 / 702 high-definition network camera gun backplane connector
● SD card slot: HT-IPC supports up to 32G Mirco SD card local storage.
● Power Interface: DC12V power input interface.
● Audio output: Φ3.5 linear audio output interface.
● Network Interface: 10 / 100M adaptive Ethernet RJ45 interface.
● Network indicator: network connection green light flashes.
● Video Input / Output: BNC interfaces, local video analog outputs; 701/702-O connector video input, display PIP.
● Power indicator: power supply work, red light.
● Reset switch: press the restart, press 3 seconds to reply to factory default; 701/702-O type default connect video input, press switches to video output for connection to monitor debug camera, then back to the video input status, connect the video input display PIP.
● Audio input: Φ3.5 linear audio input.
● USB Interface: USB 2.0 interface.
● Alarm Input: switch alarm input.
● Alarm output: switch alarm output interface.
● 485 Connection: PTZ control.

HT-IPC701 / 702-G-definition network camera gun backplane connector

● 485 Connection: PTZ control.
● SD card slot: HT-IPC supports up to 32G Mirco SD card local storage.
● Power Interface: DC12V power input interface.
● GPS antenna: When you move the camera, connect the GPS antenna to show the position of the camera is located.
● Network Interface: 10 / 100M adaptive Ethernet RJ45 interface.
● Network indicator: network connection green light flashes.
● GSM Antenna: BNC connector for connecting GSM antenna to transmit video images via GSM wireless communication system.
● Power indicator: power supply work, red light.
● Reset button: Press to restart, press 3 seconds to reply to factory default.
● USB Interface: USB 2.0 interface.
● Audio input: Φ3.5 linear audio input.
● Alarm Input: switch alarm input.
● Alarm output: switch alarm output interface.
 
HT-IPC703 / 704 723/724 Dome IR Dome Product Structure

HT-IPC 721/722 infrared gun Product Structure

HT-IPC 721-F / 722-F infrared gun Product Structure

Products Terminal
HT-IPC703,704,721,722,721-F, 722-F using the same access line.
● Black Power input interface: DC12V, for the positive electrode, AC24V automatically converted.
● Red Audio Input: local audio inputs.
● Black Network Interface: 10 / 100M adaptive Ethernet RJ45 interface.
● 485 Connection: PTZ control or card readers and other overlay information input device.
● Yellow Video output: local video analog output.
● I / O interfaces: 1 as an input, 3 and 4 as an output switch alarm input and output interfaces.
● White audio output interface: Local audio output interface.


HT-IPC-731 HD network cameras miniature structure
● Network Interface: 10 / 100M adaptive Ethernet RJ45 interface.
● 485A / B: connection ATM485 interface yellow pick 485A, gray pick 485B. It can automatically add card number and other information via dynamic setting.
● DC12V Input: Connect DC12V power for the positive electrode.
● Lens: use 8mm / 3.2 aperture.
● 1/3-inch HD progressive scan CMOS sensor ultra low-light
● maximum resolution of 3M (2048 × 1536), can output Full HD 1080p real-time image
● Support highest standard H.264 High Profile video encoding compression formats
● supports dual stream output, each stream video parameters can be set independently
● support up to 32G Mirco SD card local storage
● built-in mechanical IR-CUT
● Support WDR
● Supports 3D digital noise reduction technology
● local analog output, easy installation
● OSD configuration, superimposed time, date, name, card number and other dynamic input automatically add information
● Support two-way audio
● Supports PoE power supply (optional)
● Support auto iris, backlight compensation, auto electronic shutter function, adapt to different monitoring environment
● Supports ONVIF international standard
● support watermarking, tamper-proof
● Support for scene change detection alarm
● NAS / iSCSI storage (optional)